Use and maintenance of pneumatic polishing machine

Source：未知 Click：177 Date：2017-09-15 09:15:57【L M S】

Pneumatic polishing machine operation method.

The operation of pneumatic polishing machine is installed before the polishing pad, which has the screws, locking; then can start polishing procedure, first lift handle release lever, then put down the handle, the polishing head can be freely floating down; toward the safety lock lock button, then roll forward rotation handle open, pipe polishing machine, open after the success of the thumb from the safety lock button on the swing; mobile pipe polishing machine "W" shape, may move forward active polishing machine, at first on the floor waxing polishing layer. After the active polishing machine is started, it is necessary to make the active polishing machine adhere to the normal movement. This is done to avoid damage to the wax coat and the floor surface. In order to avoid the overload of the motor, the machine is equipped with circuit overload protection device. If the circuit breakers, wait for 10 seconds, it can be reset; when the floor waxing polishing process is completed, the moment to roll back the rotation handle, safety lock button is disengaged, the pipe polishing machine stops rolling; after the operation is completed, adhere to the active polishing machine leaning back, rear wheel with. This is done in order to avoid damage to the polishing pad show appearance, may be able to take down the stored polishing pad.

How to maintain the pneumatic polishing machine?.

The pneumatic polishing machine for regular maintenance, maintenance, can make the pneumatic polishing machine has been in good production operation, in order to ensure the normal production.

First of all to ensure that pneumatic polishing machine is placed is not stationary strong, loose tilt appearance, well pipe polishing machine machine cleaning operations, timing for active polishing machine using lubricating oil production to the power line maintenance; timing check, do not have the power exposed, such as the replacement of power line in time timely; protection of the drive motor, if found the motor does not turn or stop timely check and repair; regularly fastening machine screws for active polishing machine.