The use of cylindrical polishing machine must be meticulous use of power
Synopsis
The same maintenance ability of the cylindrical polishing machine and the tube polishing machine
1, first put the workpiece into orbit.
2. Place the center of the workpiece on the center of the thousand page wheel.
3, the track lock died, so that the track by a certain angle tilt (tilt angle is greater, the greater the rate of progress of the workpiece).
4, start the wheel motor, if the progress rate is appropriate, move the grinding head to the workpiece.
5, if the polishing machine screw commentary release progress faster, can be appropriate to track small inclination angle.
6, the outer circle polishing machine can make the guide roller lower speed when coarse throwing, the precision of the guide roll speed is high when the precision throws.
7, often check whether the lack of oil in the reducer.
8, polishing secret, often check the grinding head whether there is noise, or light move.
Recommend
Industry News
- What is the key to polishing ma
- Use and maintenance of pneumati
- Safe operation process of polis
- Polishing machine manipulation
- Polishing machine construction
- How does a pneumatic polisher p
- The use of cylindrical polishin
- Polishing machine introduction
- How to repair and protect magne
- What are the features and featu
