The key to polishing the polishing machine is to try to get the maximum rate of polishing in order to remove the damage layer as soon as it is finished. Together, the polishing damage layer shall not affect the final observation of the arra【Detail】

Pneumatic polishing machine operation method. The operation of pneumatic polishing machine is installed before the polishing pad, which has the screws, locking; then can start polishing procedure, first lift handle release lever, then put d【Detail】

1, before use, should check the wires, plugs, sockets are insulated, ready. 2, accurate use of polishing machine, check whether there is fine grinding block defect, loosening. 3, no oil, wet hand in hand grinder, to avoid electric shock inj【Detail】

I. layout: Machine handle, chassis, motor, wire, electronic switch. Two. Pace: 1. polishing machine is held up wax, polishing on the marble floor. To increase the brightness of the ground, the machine needs more than 1000 revolutions per mi【Detail】

Polishing machine has the function of sorting capsule polishing machine equipment, it is not only used to eradicate capsules, tablets (sugar tablets, tablets) appearance of the powder, so that it is clean, so as to improve the appearance of【Detail】

Glass polishing is a very fine grinding skills, requiring our operators to work carefully and carefully, and today we introduce the use of pneumatic polishing machine to polish the common sense of glass. After the end of glass grinding, the【Detail】

Synopsis The same maintenance ability of the cylindrical polishing machine and the tube polishing machine 1, first put the workpiece into orbit. 2. Place the center of the workpiece on the center of the thousand page wheel. 3, the track loc【Detail】

Polishing machine is the object appearance coarse Department clearance loss, in order to reach the mirror. The key of polishing machine control is to try to get the maximum polishing rate so as to remove the damaged layer as soon as possibl【Detail】

Repairing magnetic polishing machine 1: polishing bucket leaking, the bottom thorn has polished needle, can be removed by pliers, add a little glue 2: timer does not blink, did not press the start switch, press it to time. 3: polish the wat【Detail】

Automatic polishing machine for light steel, aluminum and copper metal products surface treatment and management of class effect, dozens of original accessories to meet different needs, an easy job to do produce a variety of different preci【Detail】

(1) need to use sandpaper polishing or soft stick bamboo clappers. In the polishing round or spherical surfaces, using soft stick can be a very good working round face and spherical radian. The harder wood, like cherry wood, is more suitabl【Detail】