Location：HOME > NEWS > Exhibition News >

Color stainless steel plate surface processing

Source：未知 Click：151 Date：2017-09-15 09:06:42【L M S】

Stainless steel from large steel mills out of time is the whole volume, the appearance of the same fog, commonly known as 2B surface; there is also called BA surface, the brightness of this appearance is often called 6K. Therefore, we see a variety of colors, stripes, shapes of stainless steel plates are processed in the late. The width of steel coils in large steel mills is limited to width, one is 1219mm, one is 1000mm wide, and the other is 1500mm wide. Therefore, the market does not keep what 1800mm width 1900mm long stainless steel plate decoration.

Surface processing:

1, mirror (also known as 8K): mirror surface, that is to say, the stainless steel sheet machine polished by the machine into the mirror, the same light, according to people. Stainless steel rolls can also be mirror treated.

2, drawing, snow, sand, usually sand: wire drawing, snow sand, usually sand is also called "scrub", these three appearance of stainless steel, mainly the appearance of sand grain is not the same, and the title is not the same. The sand grain of the drawing wire is the thickest, the longest, and the sand is usually the second. The sand grain of the snowflake sand is the smallest and the smallest. Of course, their processing machines are different. But now, there are also manufacturers demand surface made of mixed sand, than first grinding a snowflake sand, and then to do wiredrawing. Stainless steel coil can also do this kind of processing.

The above two kinds are attributed to most of their processing.

3, sandblasting: that is, the surface of stainless steel beads appear fine, sand surface. But stainless steel sand blasting is divided into sub - ray sand blasting and light sandblasting. Matt, that is to say, in the plate is still 2B face time to take sand blasting, light is polished after the mirror surface. The process can be done in stainless steel coils, but there is no such machine.

4, disorderly grain: also known as grain. The stainless steel plate, which is machined from the outside, will appear in a circle of sand ripples, and irregular patterns are seen from the vicinity.

5, embossed, also called embossing, that is, we see the appearance of a small diamond, cubic, square, panda pattern of this stainless steel plate. But we do the processing time is to do with the coil material, with a 4*8 feet of the plate is not doing this process, need to press the grain after go to the flat plate, we have to see the Striped stainless steel plate.

6, Ti: now many people say is riotous with colour made of stainless steel plate, titanium processing after the appearance of a certain color such as Huang Taijin, rose gold, sapphire blue etc.. Needs to use the machine called titanium titanium plate furnace, five kinds of pre processing in the above said time do color the can on color, but after embossing stainless steel markings but also with the 6-8K 8K machine to polish effect to color. Otherwise there is one point in demand, proposed that is black with titanium, titanium furnace to do, but now most used method is water plating titanium black, according to certain proportions of drops, then into the pool after the plate drops, the appearance of black stainless steel electrolysis. Water plating of black titanium is usually better than vacuum plating. Therefore, many people have done the rose gold color of sheet metal collectively referred to as rose gold, stainless steel, or perhaps titanium plate.

7, etching: that is, in stainless steel after the appearance of chemical agents to make it appear uneven role, perhaps some text, pictures. Usually the etching of the plate has been pre processed, you can first make the color, and then etching, you can also etch first, and then do the color. Etched markings can be etched according to customer request drawings or text, and etched on the back of the plate are no traces of positive markings.

8, retreat titanium: some people call back titanium, the back plate is called colorful stainless steel. Back in the first ti a board plating on titanium, then at a specified location recede color reaches a particular pattern, shape.

9, laser: first divided into four kinds: 1, mirror laser technology

10, no fingerprint: that is attached to a layer of oil on the stainless steel plate appearance, dry after reaching anti fingerprint and antioxidant effect.

11, colorful stainless steel, stainless steel industry defined "colorful stainless steel" refers to: stainless steel in the basic processing of the surface to do the picture. Unlike titanium, etching, embossing. The picture can be completely decided by the customer. For example, customers can choose to do "Qingming Festival", perhaps a titanium color do not come out. The plates made of this process look like plastic, and the markings are durable

12, film coated board: that is, the printed film finished by post method, composite to the appearance of stainless steel plate, can produce very exquisite pictures and markings.

13 、 copper plated, stainless steel, copper plated. Some customers say that the demand only on copper color, then choose to do titanium plated bronze. There are a lot of customers request the board to do the old, antique, it needs water and water bronze plating copper plating. When the water is plated copper, the appearance can not be processed, because even if it is processed, it will be covered by copper. After copper plating, make black silk again, finally go to have no fingerprint again. Cut the sheet appearance saw not stainless steel nature, but the color of copper.