Location：HOME > NEWS > Exhibition News >

A few points on the installation of the automatic polishing machine

Source：未知 Click：166 Date：2017-09-14 18:46:54【L M S】

Ordinary customers, whether in the choice of automatic polishing machine or installation, are very important, because these are affecting the future use of polishing machines. Today summed up some experience for the installation staff reference.

1., first of all, a comprehensive analysis of the installation site of the soil pressure, water level, etc., must meet the requirements of the installation and use of polishing machine, you can determine the installation program.

2. install the polishing machine, as far as possible to clean the ground, so as not to install the machine is not easy to clean.

3. installation to avoid high-voltage transmission lines, to avoid interference with the electronic polishing machine.

4. need to have independent power supply to avoid sharing with other high-power appliances.

5 polishing machine installation requires relatively spacious installation site, there is enough space to operate is very important.

6., rainy, wet, salt and other areas, polishing machines can not be ordinary mud on the ground, or you need to consider ventilation, drainage and many other issues.

7. installation of polishing machine shall not be installed on the tuyere, otherwise, in the wind, polishing machine can not work well.

In fact, the choice of the location of the automatic polishing machine is very important, only the correct choice of installation site, in order to guarantee the service life of the polishing machine.