Location：HOME > NEWS > Exhibition News >

How to correctly use and maintain automatic polishing machine

Source：未知 Click：158 Date：2017-09-14 17:48:25【L M S】

In order to prolong the service life of automatic polishing machine, in the process of actual use in addition to pay attention to the relevant matters needing attention, but also regularly carries on the maintenance work, to ensure the normal operation of the automatic polishing machine, let us learn more about how to use and maintenance of automatic polishing machine.

I. layout:

Machine handle, chassis, motor, wire, electronic switch.

Two, pace:

1. automatic polishing machine, polishing wax is held up on the marble floor. To increase the brightness of the ground, the machine needs more than 1000 revolutions per minute or more, using liquid high-speed polishing wax.

2. check whether the machine body is normal, whether the wax pot nozzle is blocked or not.

3. will be high-speed polishing of the ground clean and clean.

4. place the white high speed polishing pad.

5. switch on the power and adjust the handle to its proper position.

6., when polishing should be slightly raised the head, until the normal speed, and then lower the head.

7., polishing pad spray in the situation, spray wax to fog, "upper and lower 30CM, horizontal distance 80-100CM".

8. after polishing, you should clean the floor with dust, and clean the pad and the machine in real time.

9. clean everything according to the regulations and place them properly.

Three, meticulous work:

1., usually nursed back to health, often clean and rigid, regularly check the power supply, regular oiling.

2., put a warning card in order to remind guests or others carefully.

3. in operation, the power cord should be placed on the shoulder to prevent the line from falling under the mobilization disk, so as not to cause accidents.