What are the outstanding features of the automatic polishing machine?
At present, with the rapid development of all walks of life, more and more fields need to use automatic polishing machine, automatic polishing machine is also playing a very important role, occupies an absolutely dominant position. So, what are the main features of the automatic polishing machine? Today, Xiao Bian will introduce us specifically:
An important layout: the main motor driving mechanism, a rotating body rotation pulley mobilization system, held a planetary gear swing tower, disc drum, drum rotation of the sprocket held mobilization system, control and unloading roller rotation sprocket reducer machine control system, peaceful negotiation system of insurance.
The important thing in principle: the circumferential rotation body with equal intervals with four six angle roller, roller rotating body rotation with the hand held the revolution, on the other hand, sprocket system under the action of axial line polishing machine drum held around its rotation (opposite direction).
The following features of the automatic polishing machine are as follows:
1. using the principle of planetary rotation and centrifugal motion, the parts and polishing abrasives are polished and polished in the process of revolution and rotation;
2., practical batch of small and medium-sized parts, particularly practical, there are special-shaped cavity cavity and heat treatment after punishment of the workpiece, improve work efficiency 10~20 times;
3., six angle barrel lined with rubber or polyurethane (PU), synchronous belt drive, stable operation, small noise;
4. built in four six angle barrel for the degree of placement, can exchange polyurethane barrels, barrel barrel can be changed, does not affect the host time;
5., the volume of things in each drum (workpiece, grinding stone, water, etc.) maximum does not exceed the drum volume of 45% ~ 55%;
6., the workpiece and grinding stone ratio, usually 1:1 to 1:5, polishing machine exquisite, grinding time for 1:10, the detailed workpiece should be determined after the test;
What time scale principle 7. once for about 1 hours, such as think it necessary to inherit things, should be heat resistant rubber lining roller credentials boundary temperature less than 80 DEG C, every 1 hours after the replacement of water and abrasive inheritance operations held.
